Reduce your compressed air system carbon footprint
July 01st 2008 For a limited period, only in the UK,Parker domnick hunter is fitting its Dewpoint Dependent Switching (DDS) energy management system free of charge on all new orders for PNEUDRI MIDIPLUS, MX heatless and DH heat regenerative compressed air dryers
DDS is a proven energy management system developed to save significantly on the amount of energy consumed during the drying of compressed air. With a standard adsorption dryer, the energy consumed assumes the dryer is operating at 100% of its design capacity. Inclusion of the DDS energy management system ensures the energy consumed is directly proportional to the amount of water vapour entering the dryer. Compressed air dryers rarely operate at maximum capacity and an example of the energy savings available can be seen below
- Compressor installed:160KW at 7.5 bar g
- Dryer installed: PNEUDRI MX107 heatless dryer operating at 70% capacity
- Typical annual energy savings:Up to 139,590 KW of energy every year.
Additionally, every Parker domnick hunter PNEUDRI dryer is protected with OIL-X EVOLUTION pre- and after filtration, the most energy efficient compressed air filters in the world which, when compared to ordinary filtration, can increase the energy savings by a further 58,120 KW.
The combination of energy savings equates to 197,710 kW of electrical energy and an annual environmental saving of 85,406 kg of CO2.
Even greater savings will be made during periods of lower demand. All Parker domnick hunter filtration and purification products are designed with the philosophy of air quality, energy efficiency and low lifetime costs.
Help reduce your Carbon Footprint, for further information, please visit www.domnickhunter.com or Email: dhindsales@parker.com | 
